Chip Array LED:
S-2070 is a new light of SWIT Chip Array LED family, with smaller size and lower consumption for hand HD camcorders. The new generation LED technology, Chip Array LED, integrates the LEDs into a chip with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, non-glaring light, similar to the traditional Halogen bulb light.
13W Power Consumption, 70W Blub Equivalent
S-2070 requires only 13W power consumption but can output bright light equivalents to an 70W halogen bulb. The illuminance is 800 Lux at 1 meter distance and 1 meter scale.
Compact Size, Ideal for HDV camcorders:
S-2070 is compact size designed, smaller than SWIT S-2041 and S-2050 Chip Array LED light, and more suitable to use on small camcorders.
60° Wider Beam Angle:
The traditional LED lights use lens to converge and get a higher brightness, but dropped down quickly around, which will generate a visible lighting border in the image. In comparison, the S-2070 Chip Array LED generates a 60° wider beam angle, equally spread from the center to edge, and suitable for HD shooting.
Glareless light, Single Shadow:
The traditional LED array always generates several highlight pots on retina and people will feel glaring, even canft recover sight until a few seconds. In comparison, the SWIT Chip Array LED has only one bulb in appearance, and output a non-glaring, single shadow light, suitable for close interview shooting.
3200K/5000K/5600K Color Temperature:
The S-2070 LED has 5000K color temperature and also equipped with a 5600K (Daylight) and a 3200K (Tungsten) color temperature filter. You can switch the color temperature easily.
6-17V Wide Voltage Power Supply:
The S-2070 accepts 6-17V wide voltage input, so you can get power from 14.4V V-mount/Gold Mount batteries or 7.2V DV batteries. The light package goes with a D-tap to pole-tap cable (S-7104), to plug into the DC-IN port of S-2070 and get power from D-tap power output sockets, such as batteries, battery plates, or camera handle. You can also select SWIT pole-tap to pole-tap DC cable (S-7108) to get power from pole-tap DC adaptors. By installing a particular DV battery plate, you can directly mount a 7.2V DV battery onto the rear of the S-2070 light.
Interchangeable DV plates:
You can power the S-2070 by most popular DV batteries, via the easy interchangeable DV battery plates. We supply the following DV plates for optional:
Battery Mount Options:
|Mount model||Original Battery||SWIT Battery|
|S-7004C||Canon BP-945/970G||S-8945, S-8845|
|S-7004D||Panasonic VBD/CGR-D||S-8D58, S-8D98, S-8D62|
|S-7004F||SONY NP-F970/770||S-8972, S-8970,|
|S-7004I||JVC SSL-JVC50||S-8I50, S-8I75|
Power by Special Compact Battery:
By optional purchased battery S-8040
If you want a compact battery power solution, you may choose SWIT S-8040 Li-ion battery to instead of the DV plates and DV batteries. The S-8040 is specially used for SWIT S-2041 and S-2070 lights, with 7.2V, 21Wh/3Ah capacity, and can run nearly 1 hour and 40 minutes on S-2070. The S-8040 has a 4-level power indicators and a pole-tap charging input socket. You can use SWIT portable Pole-tap charger S-3010D to charger S-8040.
S-2070 has a dimmer controller to adjust the light output from 10%-100%. The color temperature will not change during the dimmer controlling.
S-2070 offers a dual purpose installation base, that can be fixed to camera via both cold shoe and 1/4h screw head.
S-2070 package includes:
- 1x S-2070 chip array LED on-camera light
- 1x S-7004 DV battery plate
- 1x Portable bag
Optional Accessories: (sold separately)
- S-7104 D-tap to Pole-tap power cable
- S-7108 Pole-tap to Pole-tap power cable
Warranty Period: two years conditional.
<align=”left”>View S-2070 Chip Array LED On-camera Light User Manual